AeroSeg Finned Tubes
    High Frequency Finned Tubing Process:
KFP Products:
  • TURB-X HF (SERRATED or SEGMENTED FIN)

  • A high frequency electric-resistance-welded, helically wound, segmented type fin. It can be manufactured from carbon steel and many stainless steel alloys with base tube diameters from 1" to 8.625".

  • SOLIDFIN HF (PLAIN FIN)

  • A high frequency electric-resistance-welded, helically wound, plain type fin. It can be manufactured from carbon steel and many stainless steel alloys with base tube diameters from 1" to 8.625".

  • AeroSegĀ® (ENHANCED SERRATED or ENHANCED SEGMENTED FIN)

  • A high frequency electric-resistance-welded, helically wound, enhanced segmented type fin. It can be manufactured from carbon steel and many stainless steel alloys with base tube diameters from 1" to 8.625".

  • TURB-X SF (SERRATED "L" FOOT FIN)

  • A standard frequency electric-resistance-welded, helically wound, segmented type fin. It can be manufactured from carbon steel and many stainless steel alloys with tube diameters from 0.5" to 4.5".

  • STUDFIN

  • A standard frequency electric-resistance-welded studded type surface. It is normally manufactured with round carbon steed studs on carbon, alloy or stainless steel tubes with diameters from 1.5" to 12.75".

  • BENDING

  • Both finned tubes and bare tubes up to 4.5" in diameter and lengths up to 70'can be cold bent up to 180 degrees.

  • FINISHING

  • Tubes can be cut and beveled. Finned tubes can be boxed for export shipment. Short term or long term protective coatings can be applied.